Instructions from the Tannery
Hides are processed to be washable, however, we highly recommend for best cleaning results, you can send them back to us for cleaning. You will be responsible for the shipping and the cleaning ($2.00 - $10.00) per hide.
Machine or hand-wash (we strongly suggest hand washing for the sake of your washing machine as well as the hide) in cold or warm water (do not exceed 100 degrees Fahrenheit. We recommend the use of Kookaburra or Eucalan Wool Wash. Do not use Woolite, laundry detergents or fabric softeners.
For Hand Washing: Put the skin in the tub and hold it under the water until the skin is thoroughly saturated with water. Gently churn the skin to get the soap moving around the fibers and let soak for 5-10 minutes then rinse. Gently squeeze out excess water.
For Machine Washing: Set to gentle cycle. Once skin is thoroughly soaked, allow machine to churn briefly. The more churning, the more the wool will mat. Let soak 5-10 minutes. Spin cycle briefly to remove excess water. Rinse if necessary. Dry. NEVER tumble dry- this will mat the wool more.
Line dry (NOT IN SUN) or dry flat (wool side down) and stretch to shape while damp. Brush with soft wire brush when wet, when damp, and when dry. Do not tumble dry. Heat will damage sheepskins, resulting is shrinking and hardening of pelt. We do not guarantee the skins through washing.
Bucks County Fur Products Inc.
220 1/2 N. Ambler St. (REAR)
P.O. Box 204
Quakertown PA 18951.